Care And Cleaning - Heartland Ovation 5400 Owner's Manual

After each session is completed, spray acrylic with a specially formulated UVT
(ultra-violet transmitting) acrylic cleaner. Wipe the acrylic with a clean cloth. The
acrylic should never be wiped with a dry cloth because this will generate a slight
static charge which will attract dust. A mild liquid detergent and water solution
can be used temporarily in place of acrylic cleaner.
ELECTRICAL SAFETY
The tanning unit should be disconnected from the power supply before cleaning
or any repairs are made! Avoid water or solution entering the lamp
compartment.
CAUTION
Do not use excessive amounts of water, any abrasive cleaners, or any spray
cleaner that carry label warnings regarding reactions to contact with skin!
DO NOT USE ALCOHOL TO CLEAN THIS UNIT!
For maximum efficiency of your tanning unit, periodic cleaning of lamps is
required. Refer to relamping instructions for acrylic removal.
www.heartlandtan.com
CARE AND
CLEANING
WARNING
13 12/06