Care And Cleaning - Heartland Ovation 2800 Owner's Manual

CARE AND
CLEANING
After each session is completed, spray acrylic with a specially formulated
UVT (ultra-violet transmitting) acrylic cleaner. Wipe the acrylic with a clean
cloth. The acrylic should never be wiped with a dry cloth because this will
generate a slight static charge which will attract dust. A mild liquid
detergent and water solution can be used temporarily in place of acrylic
cleaner.
ELECTRICAL SAFETY
The tanning unit should be disconnected from the power supply before
cleaning or any repairs are made! Avoid water or solution entering the
lamp compartment.
CAUTION
Do not use abrasive cleaners, excessive amounts of water or any spray
cleaners that carry label warnings regarding reactions to contact with skin!
DO NOT USE ALCOHOL TO CLEAN THIS UNIT!
For maximum efficiency of your tanning unit, periodic cleaning of lamps is
required. Refer to relamping instructions for acrylic removal.
www.heartlandtan.com
WARNING
21 10/27