Heartland Ovation 5400 Owner's Manual page 30

5400 & 6400 Audio System
The Ovation 5400 and 6400 are equipped with the same audio system. The salon owner can
preset (5) FM radio stations and connect to a salon music system. The salon clients can connect
their own MP3 or iPod along with their headphones.
Changing Audio System Default Settings
The tanning bed must not be running when making changes to the Audio System. There are 4
Audio System set up screens, Station Setup, Default Idle Volume, Default Session Volume and
Default Audio Source.
Changes can be made by using the display on the bed. Hold down the FAN UP button until #7
Total Bed Hours screen appears. Push the FAN UP button until the Station Setup screen appears.
Here you will have a list of options. Follow the display screen options below to preset your
favorite FM Stations.
Face Up For Next Preset – Program FM preset stations 1 – 5.
Time Up To Seek – Finds next higher station.
Time Down To Save – Saves selected station to preset number.
Start / Stop to Exit – To exit out of Setup screen.
Fan Up For Next Screen – To go to next screen.
After presetting the FM radio stations push the FAN UP button once. The display screen will show
#21 Default Idle Volume 10. The number 10 indicates the volume level of the Audio System
when the bed is not in use or idle. To change this default setting, push the TIME UP button to
increase the volume level or the TIME DOWN to decrease the volume level. Press the START /
STOP button to exit or push the FAN UP button to go to the next screen.
The next display screen will show #20 Default Session Volume 40. The number 40 indicates the
volume level of the Audio System when the SESSION begins. To change this default setting, push
the TIME UP button to increase the volume level or the TIME DOWN to decrease the volume
level. Press the START / STOP button to exit or push the FAN UP button to go to the next screen.
The next display screen will show # 30 Default Audio Source 2. The number 2 indicates the bed
will play the FM preset station that you have selected for preset station #1 when the bed is not in
use or idle. You have a choice of 7 Audio Source settings. 0 = Line Input, 1 = Aux Input, 2 = FM
Preset 1, 3 = FM Preset 2, 4 = FM Preset 3, 5 = FM Preset 4 and 6 = FM Preset 5. To change this
default setting, push the TIME UP button or the TIME DOWN button. Press the START / STOP button
to exit or push the FAN UP button to go to the next screen.
AUX
Connect the MP3 or iPod to the MP3 / iPod jack located at the head end of the bed. Once the
session has started, push the TIME UP button on the display until AUX is displayed at the top of
the display screen. From here you are able to control the volume by pushing the VOLUME UP or
VOLUME DOWN buttons on the display. Use the controls on the MP3 / iPod to select music.
Line
If there is a music system in the salon, you may connect to the audio board so the salon music
will be played in the tanning bed. Once the session has started, push the TIME UP button on the
display until LINE is displayed at the top of the display screen. From here you are able to control
the volume by pushing the VOLUME UP or VOLUME DOWN buttons on the display.
Headphones
The headphone jack is located at the head end of the bed. When headphones are plugged
in, the tanning bed speakers will not function.
www.heartlandtan.com 27 12/06