Heartland Ovation 5400 Owner's Manual page 33

INSTALLATION INSTRUCTIONS
STEP 11. Using a 7/16 wrench or socket loosen the (2) two bolts located on the canopy arm. Lift
the canopy straight up as a team at the same time. See picture 9 Carefully set the
canopy to the side. Note the canopy is in the up position. A third person will be helpful
here.
STEP 12. Underneath each end of the bench, unplug each body fan cord. See Picture 10. Secure
wires to prevent damage. Remove the bench end caps by first loosening the (4) four
retaining screws on each side of the bed and lift up and out on the end caps. See
picture 3 for proper handling.
STEP 13. Remove the (4) four screws that fasten the bench to the base (2) two are in the front rail
and (2) two are in the back rail. Also on the backside there are (4) four screws that hold
the base covers to the bench. See picture 5
STEP 14. Lift the bench straight up and out, set aside. Three people at each end are required to
complete this step. A third person needs to hold the cords so no damage occurs. See
picture 6.
Picture 1
Picture 3
www.heartlandtan.com
5400
30
Picture 2
Picture 4
12/06