Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Heartland Manuals
  4. Tanning Beds
  5. SUNDAZZLER 2M
  6. Owner's manual

Heartland SUNDAZZLER 2M Owner's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
4251 N.E. Port Drive • Lee's Summit, MO 64064 • 800-554-8268
Owner & Assembly Manual
Owner & Assembly Manual
Owner & Assembly Manual
Owner & Assembly Manual
Owner & Assembly Manual
www.heartlandtan.com
Part #94052
America's Best Tan ™
Les Spécifications Françaises Enclos
™
2M and Sundazzler ™
2M and Sundazzler ™
2M and Sundazzler
C
US
™
11/05

Advertisement

loading

Related Manuals for Heartland SUNDAZZLER 2M

Summary of Contents for Heartland SUNDAZZLER 2M

  • Page 1 4251 N.E. Port Drive • Lee’s Summit, MO 64064 • 800-554-8268 Owner & Assembly Manual Owner & Assembly Manual Owner & Assembly Manual Owner & Assembly Manual Owner & Assembly Manual America’s Best Tan ™ ™ 2M and Sundazzler ™ 2M and Sundazzler ™...
  • Page 2 Table of Contents 3 ... Welcome 4 - 6 ..2m™ Specifications/Exposure Schedule 7 - 9 ..Sundazzler™ Specifications/Exposure Schedule 10 .
  • Page 3 We have confidence in our manufactured products and that is why our equipment is backed by Heartland’s unprecedented 5 year limited warranty. Designed to be user friendly, the 2M and by Heartland’s unprecedented 5 year limited warranty. Designed to be user friendly, the 2M and by Heartland’s unprecedented 5 year limited warranty.
  • Page 4 SPECIFICATIONS 2M BOOTH 50 Lamp Heartland Rave 200 watt system - 9 minute session 50 Heartland Rave 180 APR lamps T-Max timer on board (T-Max wireless compatible) 1200 CFM fan on top for body cooling (2) 550 CFM fans driving the air-fl ow fl oor system for the body *70 AMP rated single phase, 220 –...
  • Page 5 It is recommended that you do not use any creams, oils or lotions (particularly suntan lotions) that are not recommended by Heartland Tanning, Inc. Equally important – many facial makeups have oil bases and should be removed prior to a session.
  • Page 6 Questions au sujet des ventes ou de service : Heartland Tanning, Inc. • Lee’s Summit, MO – 1-800-554-8268 Suivez le programme recommandé d’exposition pour le type de peau.
  • Page 7 SPECIFICATIONS SUNDAZZLER 46 46 Lamp Heartland Rave system - 11minute session 46 Heartland Rave 160 APR 160 watt lamps T-Max Timer on board (T-Max wireless compatible) 1200 CFM fan on top for body cooling (2) 550 CFM fans driving the air-fl ow fl oor system for the body *60 AMP rated single phase, 220 –...
  • Page 8 It is recommended that you do not use any creams, oils or lotions (particularly suntan lotions) that are not rec- ommended by Heartland Tanning, Inc. Equally important – many facial makeups have oil bases and should be removed prior to a session.
  • Page 9 Questions au sujet des ventes ou de service : Heartland Tanning, Inc. • Lee’s Summit, MO – 1-800-554-8268 Suivez le programme recommandé d’exposition pour le type de peau.
  • Page 10 1. Follow the exposure schedule in accordance with your skin type. Failure to do so may result in over- exposure. 2. You can not vary the strength of the lamps in your unit. Should you have any question regarding the proper use of your tanning system, contact Heartland Tanning, Inc. at: 1-800-554-8268 8:00 to 5:00 (CST) www.heartlandtan.com...
  • Page 11 CARE AND CLEANING OF YOUR 2M AND SUNDAZZLER ™ 46 After each session is completed, spray the booth floor with Acrylic Cleaner, a specially formulated UVT (ultra- violet transmitting) Acrylic Cleaner. Spray and clean the acrylic. Wipe the floor and acrylic with a clean cloth. The acrylic should never be wiped with a dry cloth because this will generate a slight static charge which will attract dust.
  • Page 12 Max Series is designed for complete automation and control of your tanning equipment. A Heartland Timer is an OEM board that can be installed in a tanning bed or tanning booth. Each Heartland Timer A Heartland Timer is an OEM board that can be installed in a tanning bed or tanning booth. Each Heartland Timer...
  • Page 13 Press the Start/Stop button. The current value for that parameter will be displayed and flashing. The Heartland Timer will show a number with a period illuminated in the lower center of the display. The number shown is the current value for that parameter.
  • Page 14 Setting The Address Note: If you are using the Heartland Timer as an independent timer, you don’t need to set the address on the Heartland Timer. 1. Press and hold the Start/Stop buttons simultaneously on the Heartland Timer until a .1 appears on the display.
  • Page 15 Press the Up or Down button until the desired delay time is displayed. The highest delay time that can be set on the Heartland Timer is 10 minutes. If you want no delay time, set the display to 0. If you set the delay time to 0, the session time will start immediately after the Start/Stop button is pressed.
  • Page 16 T-Max Series timers on page 16, figure B). Configuration Set the address on the Heartland Timer in the tanning room to 1. Set the address on the T-Max 3A to 0.0. For setting the delay refer to the T-Max 3A user’s guide.
  • Page 17 To check and change Lamp Hours (or any other parameter). TPI ( Third Party Input) Mode If you are using a FST or Database Series timers, you will need to place the Heartland Timer in the TPI mode. Connecting the TPI Input 1.
  • Page 18 Cool down mode is the time the bed needs to cool down after a session has ended. The Factory default setting is 3 minutes. 1. Connect the wires that control the fans to the headers on the back of the Heartland timer. 2. Set parameter 13 to the desired cool down time.
  • Page 19 FIGURE C - Connecting the Heartland Timer to a T-Max ® ® Series It does not matter in which order the rooms are connected. The only requirement is that there It does not matter in which order the rooms are connected. The only requirement is that there It does not matter in which order the rooms are connected.
  • Page 20 ASSEMBLY INSTRUCTIONS UNIT 1/2" BOLTS 1/2" BOLTS STEP 2 STEP 2 LOWER LOUVERED LOWER LOUVERED PANEL PANEL STEP 1 STEP 1 ALIGNMENT HOLE BASE STEP 2 ALIGNMENT PIN STEP 1 www.heartlandtan.com www.heartlandtan.com 12/05 12/05...
  • Page 21 ASSEMBLY INSTRUCTIONS 3/8" X 1" HEX BOLTS FIG. 3 HINGE BRACKET WASHER STEP 4 TOP OF UNIT HINGE BRACKET ON TOP OF UNIT PIN ON DOOR FIG. 2 STEP 4 PIN ON DOOR BUSHING ON SIDE OF UNIT FLOOR ADJUSTMENT PLATE FIG.
  • Page 22 2M - SUNDAZZLER ™ 46 ASSEMBLY INSTRUCTIONS TOOLS YOU WILL NEED: A.3/4 SOCKET B.9/16 SOCKET C.3/8 SOCKET D.2 - 9/16 OPENED END WRENCHES E.POWERED SCREW GUN WITH #2 PHILLIPS BIT F.TWO (2) PEOPLE STEP 1: REMOVE LOWER LOUVERED PANELS FROM BACK OF UNIT. STEP 2: ALIGN BACK OF UNIT WITH ALIGNMENT PIN AS SHOWN IN DRAWING BELOW.
  • Page 23 SLACK IN CORD CLAMP CORD TO SLACK IN CORD TOP OF UNIT 3/8" SCREW BACK OF UNIT PLUGS BASE FAN BASE FAN CORDS CORDS Floor Base Ramp Lip Ramp www.heartlandtan.com www.heartlandtan.com 12/05 12/05...
  • Page 24 2M, SUNDAZZLER ™ ™ HARNESS CORDS/RECEPTACLES CORD #1 / RECEPTACLE #1 PIN# COLOR DESTINATION Blue bal 1-1, L-door 1st lamp from left to right (top) Yellow bal 1-2, L-door 2nd lamp from left to right (top) Orange bal 1-3, L-door 3rd lamp from left to right (top) Purple bal 1-4, L-door 4th lamp from left to right (top) Grey...
  • Page 25 SUNDAZZLER ™ HARNESS CORDS/RECEPTACLES PIN# COLOR DESTINATION (SEE PAGE 26 FOR 2M) Blue bal 3-1, back 1st lamp from left to right (top) Yellow bal 3-2, back 2nd lamp from left to right (top) CORD #3 / RECEPTACLE #3 Orange bal 3-3, back 3rd lamp from left to right (top) Purple bal 3-4, back 4th lamp from left to right (top)
  • Page 26 2m ™ HARNESS CORDS/RECEPTACLES CORD #3 / RECEPTACLE #3 CORD #5 / RECEPTACLE #5 CORD #4 / RECEPTACLE #4 PIN# COLOR DESTINATION PIN# COLOR DESTINATION Blue bal 4-1, back 1st lamp from right to left (top) Empty Yellow bal 4-2, back 2nd lamp from right to left (top) Empty Orange bal 4-3, back 3rd lamp from right to left (top)
  • Page 27 www.heartlandtan.com www.heartlandtan.com 12/05 12/05...
  • Page 28 www.heartlandtan.com www.heartlandtan.com 12/05 12/05...
  • Page 29 www.heartlandtan.com www.heartlandtan.com 12/05 12/05...
  • Page 30 SUNDAZZLER ™ CHANGING ROOM ASSEMBLY www.heartlandtan.com www.heartlandtan.com 12/05 12/05...
  • Page 31 CONTENTS 2 - 24” Stainless Panels 2 - 9 1 / 2 / 2 / ” Stainless Panels 4 - 16” Stainless Panels 8 - Angle Extrusion 2 - Door Extrusion 2 - Right Hand Base Frame Assembly 2 - Left Hand Base Frame Assembly 1 - Door Header 1 - Door Assembly 2 - Bottom Spacer (Right Hand and Left Hand)
  • Page 32 STEP 1: POSITION 2M BASE ON FLOOR. STEP 2: REMOVE ORIGINAL SPACER BELOW HINGE BRACKET ON BASE AND INSTALL SPACER INCLUDED IN CHANGING ROOM KIT AS SHOWN IN ILLUSTRATION A. STEP 3: ATTACH SPACER TO FRAME BRACKET BELOW HINGE SPACE AS SHOWN IN ILLUSTRATION #1.
  • Page 33 Illustration #3 STEP 6: POSITION AND LEVEL LEFT HAND AND RIGHT HAND BASE FRAME ASSEMBLY AS SHOWN IN ILLUSTRATION #3 AND ATTACH TO BRACKETS AS SHOWN USING 1 / 1 / 1 4 / 4 / X 20 BOLTS. STEP 7: REMOVE AND DISCARD TOP HINGE BRACKETS ON 2M BACK ASSEMBLY. STEP 8: POSITION DOORS ON 2M UNIT USING TOP LEFT HAND - RIGHT HAND HINGE BRACKETS INCLUDED WITH CHANGING ROOM.
  • Page 34 STEP 15: WITH TOP DOOR HINGE BRACKET LOOSE - START TOP RIGHT HAND - LEFT HAND FRAME UNDER BRACKET AND OVER EXTRUSION/PANELS. STEP 16: ONCE IN PLACE ATTACH FRAME TO BRACKET USING 1 / 4 / 4 / -20 BOLTS AS SHOWN IN ILLUSTRATION #4.
  • Page 35 NOTICE: Any misuse, abuse, modifications, alteration, improper installation, etc. of this product or its intended use will subject said party to direct responsibility for any and all consequences resulting from such action. Furthermore, such actions will void all warranties and may relieve Heartland Tanning, Inc. of any liabilities relating to said product. www.heartlandtan.com www.heartlandtan.com...