Siemens MOBILETT Plus HP Maintenance Instruction page 27

Inspection and Maintenance
NOTE
Fig. 3:
SIM Brake lining
•
Check the brake lining
must be replaced. Refer to the section on "Adjusting the hand brake/parking brake" in
the Service Instructions.
•
Remount the wheel.
SIM Secure mounting
SIM Ease of movement
•
Check that the wheel is securely mounted and that it turns freely.
•
Check the other wheel following the same procedure.
Siemens AG
Medical Solutions
Under normal operating conditions, the drive belt does not require
any adjustment throughout the lifetime of the system.
(Fig. 3 / p.
SPR8-220.101.04.03.02
07.05
27). If the lining is worn down to less than 1 mm, it
Page 27 of 64
CS PS 24
27
MOBILETT Plus HP