Siemens MOBILETT Plus HP Maintenance Instruction page 22

22
Technical Safety Checks,
Test Certificate - check
3.3.2 Equivalent patient leakage current
measurement
4. Mechanical checks
4.1 Are all wall, ceiling and floor mountings
firmly attached and in place, without any
damages?
4.2 Are all mechanically moved system
parts clean and smoothly running (lubri-
cated, if required)?
4.3 Are the wire cables, chains, belts and
spindles free from wear and tear?
4.4 Mobile equipment: Are the wheels /
castors and brakes OK?
4.5 Is there any unusual noise during oper-
ation (e.g., gearing)?
5. Functional checks
5.1 Function of the emergency-stop switch n.a.
MOBILETT Plus HP SPR8-220.101.04.03.02
07.05
Maintenance instructions – check/
Comments
n.a.
n.a.
n.a.
2.2.5 Transport safeguard, checks:
SIM Damage
SIM Locking
2.2.8 Arm system and single tank, checks:
SIM Movement of the arm system
SIM Movement of the single tank fork
SIM Single tank movement
2.2.1 Rear wheels, check:
SIM Drive belt
2.2.1 Rear wheels, checks:
SIM Damage
SIM Brake lining
SIM Secure mounting
SIM Ease of movement
2.2.2 Front wheels, checks:
SIM Secure mounting
SIM Ease of movement
2.2.3 Supporting wheels, checks:
SIM Ease of movement
SIM Damage
2.2.4 Brakes, checks:
SIM Uniformity
SIM Braking force
SIM Locking
2.2.8 Arm system and single tank, check:
SIM Movement of the arm system
n.a.
Page 22 of 64
CS PS 24
General
Siemens AG
Medical Solutions