30
2.2.4
Brakes
Fig. 7:
SIM
Uniformity
SIM
Braking force
SIM
Locking
•
Check whether the hand brake is sufficient to stop the unit and that it does not pull to the
left or the right when applying the brake.
•
Lock the brake.
•
Remove the upper, left and right covers and the cover with the cassette compartment.
•
The brake force can be increased by increasing the tension on the brake cable
(Fig. 7 / p.
hand brake/parking brake" in the Service Instructions.
MOBILETT Plus HP
It should not be possible to push the MOBILETT using average force. Slight
skidding is permissible when applying a force greater than 350 N.
30). Additional information can be found in the section on "Adjustment of the
SPR8-220.101.04.03.02
07.05
Inspection and Maintenance
Page 30 of 64
CS PS 24
Siemens AG
Medical Solutions