Extreme Networks ExtremeWireless AP3000X Installation Manual page 24

Install the Access Point on a Silhouette Ceiling
3. Lightly push onto to the ceiling rail and rotate the accessory clockwise until the
hinges hook over the edge of the rail and the white tabs click in place.
Figure 7: AH-ACC-BKT-AX-SL accessory bracket
Call out
1
2
3
4. Align the red dot on the back of the access point against the accessory bracket red
dot.
24 ExtremeWireless™ AP3000X Access Point Installation Guide
Note
There are two white tabs in the back of the bracket that holds on to the
ceiling rail in place. Use your finger to pull and unhook one side of the white
tab if you want to remove the accessory from the ceiling rail.
Gently rotate the bracket counterclockwise and if there is resistance, the
other white tab in the back of the accessory must also be released.
Note
The accessory has a circular tip that fits into the circular depression on the
back of the access point.
Description
Metal hinges on the AH-ACC-BKT-AX-SL bracket.
White tabs on the AH-ACC-BKT-AX-SL bracket.
Drawing of 1/8 in. or 1/4 in. ceiling grid, for your
reference.
Access Point Installation