Auto Reduction - Aficio 1015 Operating Instructions Manual

Auto Reduction

By default, if the receiver's paper is
smaller than the paper you are send-
ing on, the message is automatically
reduced to fit onto the paper available
at the other end.
Transmitter
(This machine)
Important
❒ If you turn this feature off, the
scale of the original is maintained
and some parts of the image may
be deleted when printed at the oth-
er end.
Note
❒ You can switch this feature on and
off with the User Parameters. The
default setting is on. See P.72 "User
Parameters" (Switch01, Bit2).
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
B
Set your original and select any
scan settings you require.
C
Receiver
Reduction
ND1X02E0
D
E
ND1X02E1
F
G
H
I
Press the { { { { Transmission Option} } } } key.
The Transmission Option menu
appears.
Press 0 0 0 0 or 1 1 1 1 until "7. Auto Re-
duction" is displayed and press
the { { { { OK} } } } key.
Press 0 0 0 0 or 1 1 1 1 to select "On" or
"Off".
Press the { { { { OK} } } } key.
Press the { { { { Transmission Option} } } } key.
Specify the destination.
If you want to specify another des-
tination, press the {OK} key and re-
peat step H.
Press the { { { { Start} } } } key.
Auto Reduction
1
11