Reception Time; Image Rotation; Page Separation And Length Reduction (Not Available In Some Countries) - Aficio 1015 Operating Instructions Manual

Reception Time

You can have the date and time when
a message was received printed at the
bottom of the received image. This
feature is turned off by default—turn
it on with the Initial Setup RX set-
tings. See P.56 "Changing the Initial
Setup Reception".
Limitation
❒ When a received message is print-
ed on two or more sheets, the date
and time is printed on the last
page.
Note
❒ The date and time when the mes-
sage was printed can also be re-
corded on the message. If you need
this feature, please contact your
service representative.

Image Rotation

If you have installed paper in the cas-
sette portrait K, incoming fax mes-
sages will be rotated automatically to
fit on the paper.
your machine
Page Separation and Length
Reduction (Not Available in
Some Countries)
When the size of a received message
is longer than the paper loaded in the
machine, each page of the message
can be split and printed on several
sheets, or reduced and printed on a
single sheet. For example, this feature
splits the message if the length ex-
ceeds 0.79" or more, by reducing
within 0.79". When a message is split,
the split mark (*) is inserted at the
split position and about 0.39" of the
split area is duplicated on the top of
the second sheet.
ABC
(Document)
Note
❒ Your service representative can
customize this feature with the fol-
lowing settings. Bracketed values
are defaults.
• Reduction (on)
• Print split mark (on)
• Overprinting (on)
• Overprinting length (0.39")
ND1X00E9
• Guideline for split (when mes-
sage is 0.79" longer than paper)
Printing Functions
4
ND1X01E1
41