Speed Dial; Registering Speed Dial - Aficio 1015 Operating Instructions Manual

Setup

Speed Dial

Registering Speed Dial

If you register a destination in a
Speed Dial, you can dial that number
by just pressing the {Speed Dial} key
followed by a two digit code.
Use these steps to program a new
3
Speed Dial or overwrite an existing
one. You can register the following
items in a Speed Dial:
• Destination fax number (up to 100
numbers, up to 254 digits for each
number)
• Destination name (up to 20 charac-
ters)
• A Telephone Directory search let-
ter (A to Z)
• Label Insertion (whether to print
the destination name on faxes sent
to this number)
Important
❒ We recommend that you print the
Speed Dial list and keep it when
you register or change a destina-
tion.
Limitation
❒ When a registered Speed Dial is be-
ing used for a standby Memory
Transmission, the message "
Dial is in Use. Cannot Change.
is shown and you cannot change the
destination for this Quick Dial. See
Chapter 5 "Printing Reports/Lists"
in the Advanced Features manual.
Note
❒ You can specify codes 00 to 99.
46
A
Press the { { { { User Tools} } } } key.
B
Press 0 0 0 0 or 1 1 1 1 until "4. Fax Fea-
tures" is displayed.
C
Press the { { { { OK} } } } key.
Confirm that "1. Program / Delete"
is displayed.
D
Press the { { { { OK} } } } key.
E
Press 0 0 0 0 or 1 1 1 1 until "3. Prog.
This
"
Speed Dial" is displayed.
F
Press the { { { { OK} } } } key.