Canceling Transmission or Reception
Transmission files are originals that
have been stored in memory and are
awaiting transmission. The features
that produce transmission files are
Memory Transmission, Transfer Re-
quest, Polling Reception. For details
about these features, see Chapter 2
"Memory Transmission" in the Basic
Features manual,P.13 "Transfer Re-
quest", and P.12 "Polling Reception".
If you notice an error in the destina-
tion specified or the document con-
tent after scanning a document into
memory, you can cancel transmission
of that document. This is done by
searching for the document in the fax
machine's memory and deleting it.
Note
❒ You can cancel Memory Transmis-
sion even while files are being sent.
However, any pages that have al-
ready been sent cannot be can-
celed.
❒ To cancel transmission in progress,
press the {Clear/Stop} key.
❒ You can print out a File List to con-
firm the transmission files stored
in memory.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
2. Job Information
B
Press the { { { { Job Information} } } } key.
Confirm that "1. Cancel TX / RX" is
displayed.
C
Press the { { { { OK} } } } key.
D
Display the file you want to can-
cel.
To display the file, enter the file
number with the number keys, or
press 0 or 1 until the file number
is displayed.
Note
❒ If you make a mistake, press the
{Cancel} key and try again.
❒ If you cannot find the file you
want to cancel, the document
has already been sent.
15