Transfer Request - Aficio 1015 Operating Instructions Manual

Transfer Request

Transfer Request allows fax machines
that have this feature to automatically
distribute incoming messages onto
multiple fax destinations. This feature
helps you save costs when you send
the same message to more than one
place in a distant area, and saves time
since many messages can be sent in a
single operation.
The diagram below may make the
concept clearer.
The Transfer Stations you specify
must be machines of the same make
as this machine and have the Transfer
Station function.
Requesting
party
Transfer
Station
Transfer
Result Report
Preparation
Before using this feature, you must
program the Polling ID. See P.81
"Polling ID".
Polling ID's of the requesting party
(this machine) and Transfer Sta-
tions must be identical.
Before using this feature, you must
program the Transfer Report. See
P.85 "Transfer Report".
The following terminology is used in
this section.
❖ ❖ ❖ ❖ Requesting Party
The machine where the message
originates from, that is, the ma-
chine making a Transfer Request
(in this section, this machine).
❖ ❖ ❖ ❖ Transfer Station
The machine that forwards the in-
coming message to another desti-
nation, that is, the machine that
receives the Transfer Request.
❖ ❖ ❖ ❖ End Receiver
The final destination of the mes-
sage, that is, the machine that the
Transfer Station sends to. End Re-
ceivers must be programmed into
Q u i c k D i a l s , S p e e d D i a l s o r
Groups in the Transfer Station.
Limitation
❒ You can specify only one Transfer
Stations in a Transfer Request.
End Receiver
❒ You can have up to 30 End Receiv-
ers per Transfer Station. If you
specify a Transfer Station Group,
End Receiver
the Group counts as a single re-
ceiver.
❒ The combined total of End Receiv-
End Receiver
ers and Transfer Stations you spec-
ify with the number keys cannot
exceed 30.
ND1X01E9
A
Set your original and select any
scan settings you require.
B
Press the { { { { Transmission Option} } } } key.
Transfer Request
1
13