Polling Reception; File Reserve Report; Communication Result Report - Aficio 1015 Operating Instructions Manual

Transmission Options

Polling Reception

Use this function if you want to poll a
message from another terminal. You
1
can also poll documents from many
terminals with only one operation
(use Groups to fully exploit this fea-
ture).
Receiver
(This machine)
Limitation
❒ Polling Reception requires that the
other machine can perform Polling
Transmission.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
B
Press the { { { { Transmission Option} } } } key.
12
Sender
Transmission
Request
C
Press 0 0 0 0 or 1 1 1 1 until "8. Polling RX"
is displayed.
D
Press the { { { { OK} } } } key.
E
Press 0 0 0 0 or 1 1 1 1 to select "On" or
"Off".
F
Press the { { { { OK} } } } key.
G
ND1X01E8
Specify the other party's fax
number.
H
Press the { { { { Start} } } } key.

File Reserve Report

This report is printed after Polling Re-
ception has been set up.
Note
❒ By default, this report is turned off.
Turn it on with the User Parame-
ters. See P.72 "User Parameters"
(Switch03, Bit3).

Communication Result Report

This report is printed after a Polling Re-
ception has been completed and shows
the result of the Polling Reception.
Note
❒ You can also check the result of a
Polling Reception with the Journal.
❒ By default, this report is turned on.
Turn it off with the User Parame-
ters. See P.72 "User Parameters"
(Switch03, Bit4).