Facsimile User Tools
Changing the Initial Setup Reception
The Initial Setup Reception function
allows you to change settings for the
following reception functions.
• Reception Mode
See Chapter 2 "Selecting the Re-
ception Mode" in the Basic Fea-
tures manual.
• Checkered Mark
See P.40 "Checkered Mark".
• Center Mark
See P.40 "Center Mark".
• Print RX Time
See P.41 "Reception Time".
5
• Forwarding
See P.65 "Forwarding".
A
Press the { { { { User Tools} } } } key.
B
Press 0 0 0 0 or 1 1 1 1 until "4. Fax Fea-
tures" is displayed.
C
Press the { { { { OK} } } } key.
56
D
Press 0 0 0 0 or 1 1 1 1 until "5. Initial Set-
up RX" is displayed and press the
{ { { { OK} } } } key.
The "Initial Setup RX" menu is
shown on the display.
E
Press 0 0 0 0 or 1 1 1 1 until the mode you
want to change is displayed and
press the { { { { OK} } } } key.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and enter the
correct number.
F
Change the setting using the 0 0 0 0 or
1 1 1 1 key and press the { { { { OK} } } } key.
❖ ❖ ❖ ❖ Reception Mode
❖ ❖ ❖ ❖ Checkered Mark
❖ ❖ ❖ ❖ Center Mark