Standby Display; Communication Display; Display Prompts - Aficio 1015 Operating Instructions Manual

Getting Started

Standby Display

While the machine is in standby mode
(immediately after it is turned on or af-
1
ter the {Cancel} key is pressed), the fol-
lowing display is shown.
Note
❒ To return the machine to standby
mode, do one of the following:
• If you have set the original and
have not pressed the {Start} key,
remove the original.
• If you have not set an original,
press the {Cancel} key.
• If you are in User Tools mode,
press the {User Tools} key or the
{Cancel} key.

Communication Display

While the machine is communicating,
the status is displayed.
❖ ❖ ❖ ❖ Display during Memory Transmission
or Memory Reception:
The destination's name or fax
number appears on the top of the
LCD display.
Note
❒ Even when the machine is sending
or receiving a fax message from/
into memory, you can still scan the
next original into memory.
❖ ❖ ❖ ❖ Immediate Transmission:
12

Display Prompts

Depending on the situation, the ma-
chine will show various prompts on
the display.
❖ ❖ ❖ ❖ Instructions and Requests
❖ ❖ ❖ ❖ Questions
❖ ❖ ❖ ❖ Selections
❖ ❖ ❖ ❖ Status