Basic Functions; Adjusting Copy Image Density; Selecting An Original Type - Aficio 1015 Operating Instructions Manual

Basic Functions

The following basic functions are ex-
plained in this section.
❖ ❖ ❖ ❖ Adjusting Copy Image Density
❖ ❖ ❖ ❖ Selecting an Original Type
Text and Photo
❖ ❖ ❖ ❖ Selecting Copy Paper
Auto Paper Select and Manual Pa-
per Select
❖ ❖ ❖ ❖ Auto Reduce/Enlarge
The machine can choose an appro-
priate reproduction ratio based on
the paper and original sizes you se-
lect.
Note
❒ You can select functions to be acti-
vated when System Reset is turned
on, when Energy Saver is turned
off, or after the machine is pow-
ered on. See P.62 "Copier Features".
❒ You can change default settings for
basic functions. See P.62 "Settings
You Can Change with the User
Tools".

Adjusting Copy Image Density

You can adjust the copy image densi-
ty to match your originals.
If you require darker or lighter cop-
ies, adjust the image density yourself.
A
Press the { { { { Lighter} } } } or { { { { Darker} } } } key
to adjust the image density.

Selecting an Original Type

There are two ways to match your
originals:
❖ ❖ ❖ ❖ Text
If you do not select either mode,
your originals will be scanned
with the settings suitable for text
originals (Text mode).
❖ ❖ ❖ ❖ Photo
Delicate tones of photographs and
pictures can be reproduced with
this mode.
Note
❒ You can change the detailed set-
tings for Text and Photo each with
the User Tools. See P.62 "Settings
You Can Chang e with the User
Tools".
Basic Functions
2
25