Table of Contents

Advertisement

Sort

Type 1 requires the optional 16MB copier memory unit.
The machine can scan your originals
into memory and automatically sort
the copies.
• Sort
• Rotate Sort
Limitation
❒ The maximum paper length for the
sort function is less than 433 mm.
❒ You cannot use the bypass tray
with the Rotate Sort.
Note
❒ The maximum tray capacity is as
follows. When the number of cop-
ies exceeds the tray capacity, re-
move copies from the tray.
❖ ❖ ❖ ❖ Metric version
Internal tray
• B4JIS or larger: 250
• A4 or smaller: 500
❖ ❖ ❖ ❖ Inch version
Internal tray
• 8
• 8
❒ The maximum tray capacity might
be less than the above when you
use the Rotate Sort.
❒ The maximum tray capacity might
also be reduced when copy paper
is considerably curled.
2
sheets (80g/m
)
2
sheets (80g/m
)
" × 14" or larger:
1
/
2
250 sheets (20 lb)
" × 11" or small-
1
/
2
er: 500 sheets (20 lb)
Sort
Copies can be assembled as sets in se-
quential order.
❖ ❖ ❖ ❖ Sort
❖ ❖ ❖ ❖ Rotate Sort
Two sorting methods are available:
❖ ❖ ❖ ❖ Sort
Copies can be assembled as sets in
sequential order.
❖ ❖ ❖ ❖ Rotate Sort
Every other copy set is rotated by
90°KL and delivered to the copy tray.
Note
❒ To switch between Sort and Rotate
Sort modes, access the user tools.
See "9.Sort" in P.62 "Settings You
Can Change with the User Tools".
❒ The paper sizes that can be used with
the Rotate Sort function are as follows:
Metric version
Inch version
Sort
A4KLB5JISKL
" × 11"KL
1
8
/
2
2
29

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

101825152518

Table of Contents