Cors Network Binding - YUNEEC H850 Operation Manual

Step 4: Reboot the drone
After all axis have been calibrated, tap the Reboot Vehicle button on the popped-up dialogue box
to activate the calibration.

CORS Network Binding:

The Network CORS and RTK GPS have been disabled by the default setting. The H850 Drone will
be positioned and navigated by using single GPS technology.
The RTCM Source was disabled by default under the GNSS RTK item.
The operator can connect the drone with the Network CORS as per the following steps to get a
higher positioning accuracy.
Step 1: After the T1 Transmitter and drone are bound, tap the Wi-Fi icon and select a Hotspot
to make the T1 Transmitter connect to the internet.