YUNEEC H850 Operation Manual page 11

Notice: For a more detailed introduction please refer to the corresponding Gimbal Operator
Manual.
Other payloads
Yuneec has several different camera/payload devices for use on the H850.
Get more information on www.yuneec.com.
SD CARD SELECTION
Yuneec recommends using a SDXC Class 10 UHS-3 micro SD card for recording 4k video. Using the
UHS-3 card allows the camera buffer to record to the micro SD card faster, resulting in fewer
buffer overruns.
Attaching / Detaching the gimbals
Attaching
Step 1
Find the Unlocked Mark etched on the Gimbal
Yaw Motor and align the Mark Line with the
front of the damping plate.
Step 2
Insert the Gimbal Yaw Motor into the
damping plate and rotate it counterclockwise
until the Mark Line of the Locked Mark aligns
with the front of the damping plate to secure
the gimbal.
Step 3
Remove the lens protector