YUNEEC H850 Operation Manual page 36

5 Photo/Video Mode Switch
Switch the Camera mode between the Photo mode with the Video recording mode. Just tap
the Icon to switch the Camera work mode.
Camera in video mode
6 Shutter/Record button
In the Video Recording mode the icon is a red dot. Tap it to start recording the video and tap
again to stop recording.
In the Single Photo mode the icon is a white dot. Tap it to capture a photo
In the Time Lapse Photo mode the icon is a white dot with time interval shown in the centre.
Tap it to start the time interval shooting and tap again to stop.
If the SD card is full or the camera without an SD card the icon is a gray dot that means you
cannot record anything.
Five different status of the Shutter or Start/Stop recording soft button
Tap to start
Recording video
7 Counter in photo mode/ Timer in video mode
In the photo mode the counter shows how many photos you have recorded within a single
power on time .Once you have powered off the drone the counter number will be reset.
In the video mode the timer shows the time you have recorded in each single video shoot.
8 Gallery
The main function of Gallery preview enables operators to check the pictures and videos taken
on the remote control, without pulling out the SD card in the camera. It offer the ability to
check the quality of its own aerial photos without landing, so that operator can quickly
reshoot the unsatisfactory photos or videos, greatly improving the efficiency of taking aerial
photos.
The photos or videos also can be deleted in the gallery function to save the storage capacity of
the Remote Controller.
Note: When deleting in the Gallery, the device will only delete the file in the Remote
Controller, you won't delete them in the Micro SD card which is inserted in the Gimbal Camera.
Tap to Record
Tap to start time
one photo interval shooting
Camera in Photo mode
Tap to stop the
Video recording
or time interval
shooting
No SD card or
SD Card full