Execute The Flight Mission - YUNEEC H850 Operation Manual

After the drone and transmitter are connected the Coaching button will be
displayed on the plan setting panel.
The coaching function will allow the Datapilot 2.0 App to capture the drone current GPS position
as a new waypoint.
Tap the takeoff button to add a takeoff point for the Blank flight plan, and then tap the Coaching
button, the operator can add a waypoint by a long press on the waypoint button.
After all the waypoints have been captured tap the Mission Route Setting Button to upload the
waypoint data to the drone.

Execute the flight mission

No matter what kind of the flight plan was created, to execute the operator needs to upload the
plan to the drone first.
After the flight plan was confirmed and the drone is connected, tap the "Upload Required" or
"Upload" to upload the mission to the drone.
Press and hold the Waypoint button to add the waypoint
on the drone GPS position.