YUNEEC H850 Operation Manual page 41

Camera Behavior Setting Menu Instructions
No Change – Camera maintains its current mode/settings.
Take Photo – Captures a photo at the current position.
Take Photos (Time) – Captures photos over a set time interval.
Take Photos (Distance) – Captures photos over a set travel distance.
Stop Taking Photos – Stops the camera from taking photos.
Start Recording Video – Begins video recording.
Stop Recording Video – Stops video recording.
Gimbal Attitude Setting Instructions
Gimbal - Adjust the camera pitch and yaw at the currently selected Waypoint. To adjust pitch,
select a value between 0 (flat to the ground) and 90 (straight down).
To adjust the yaw select a value between -180
the airframe centre line).
Position Edit Menu
There is a Position Edit Menu for each waypoint. To open this menu, please tap the setting icon
at the upper right corner of the Waypoint Setting Panel for the selected waypoint.
Camera Behavior Setting Menu
Tap to open the Drop-down menu for Camera
behavior setting for the selected waypoint.
Camera Mode Setting Menu
Tick the Box before the "Mode" then tap to open
the Drop-down menu for Camera mode setting for
the selected waypoint.
Gimbal Attitude Setting
Tick the Box under the "Gimbal" then type in the
Pitch and Yaw data to set the gimbal attitude for
the selected waypoint.
°
(left of the airframe centre line) and 180
°
(right of