St10+ And Receiver Binding - YUNEEC Typhoon Q500 4K Instruction Manual

ST and Receiver Binding
Step
Turn on the TYPHOON and
ater the Main LED Status Indicator
begins to flash b ue rapid y it the
back end upward approximate y
then back down to eve two
mes to put the aircrat receiver into
bind mode The Main LED Status
Indicator wi begin to the flash
orange very rapid y when
aircrat receiver are in bind mode
Model Select
New Model gh
2 x 45+°
the
Step Turn on the ST
and if required tap the
screen outside of the pop
up status window
bypass the RC and WiFi
connec on process
Step Tap the Mode
Se ect buton
required press
bypass any pop
warnings a erts
Step Se ect the exis ng
mode for examp e
TYPHOON you wou d ike
to bind to or create a New
Mode and if required
press OK to bypass any
pop up warnings a erts
Model
SR24_16042
to
SR24_16042
and if
OK to
up
the
27
Step
Se ngs
required
bypass
warnings a erts
Step
buton
SR XXXXX
isted in the co umn under
Mode then tap OK ater
the connec on has been
estab ished
Camera
Not connected
Step
buton two
return to the main screen
and the
shou d
connect to the ST
Tap the F ight
buton and if
press OK to
any pop up
Tap the Bind
and se ect the
receiver
Tap the Back
mes to
mode receiver
automa ca y