Binding Breeze With Your Smart Device; Firmware Upgrade; Compass Calibration - YUNEEC Breeze 4k Quick Start Manual

POWER OFF: Press and hold the power button until
the LED glows solid red. After successfully switching
off, it will emit a "power off" sound after letting go
of the power button.

8. BINDING BREEZE WITH YOUR SMART DEVICE

Power on your Breeze on a flat and stable surface and
wait for it to complete initialization. When the LED
indicator blinks blue rapidly, Breeze has entered the
"Wi-Fi" bind mode.
METHOD 1: If you are using an iPhone or an iPad,
select Settings > Wi-Fi ;
If you are using an Android smart phone, select
Settings > Wireless and networks > Wi-Fi. Select the
network: BreezeXXXXXX and enter the Password:
1234567890.
METHOD 2: Tap [
network directly. Select the network: BreezeXXXXXX
and enter the Password: 1234567890.

9. FIRMWARE UPGRADE

NOTICE: To download the latest firmware, make sure
that your smart phone/tablet computer is connected
to the Internet.
1.Tap [ ] and select [
2.Tap [
LOOK FOR AVAILABLE
UPGRADES
3.Tap [
DOWNLOAD BREEZE
CAM FIRMWARE V2.2
NOTICE: If you have installed the latest firmware, a
notice will pop up on screen that says: "You currently
have the latest firmware installed on your system".
4.Tap [
NEXT
5.Bind your device to the Breeze.
6.Tap [
UPGRADE
7. Wait until upgrade is completed and restart Breeze.

10. COMPASS CALIBRATION

NOTICE: Only calibrate the compass in open areas/fields
far away from cars, power lines and other metallic
surfaces/structures. Make sure that your Breeze is
placed level and about 1.5m (5ft) above the ground.
] and you can connect the Wi-Fi
] to search for the latest firmware.
] to download the firmware.
] to proceed.
].
Bind Mode
Firmware Upgrade ]