YUNEEC H850 Operation Manual page 54

side. Through this panel the operator can set all the CORRIDOR SCAN parameters. Drag the
panel up and down to view more items.
Adjust the Corridor Scan parameters
After the Corridor Scan area has been confirmed the operator can adjust the scan parameters.
Click the "Grid" tap under the selected Corridor Scan mission to adjust the flight route.
Select the Camera
As the same as the Survey mode, selecting a correct camera is especially important to achieve a
correct result.
The most functions in the Corridor Scan Setting Panel are the
same as what in the Survey function.
But the Corridor Scan Setting Panel still has a function that
the Survey doesn't. That is Width Setting.
Type the width parameter directly in the text box to adjust
the width of the corridor.