Breakpoint Continuation - YUNEEC H850 Operation Manual

Land or Return in mission flight
Tap the Land button and slide to confirm then the drone lands at the
current position.
Tap the Return button and slide to confirm then the drone returns to the
launch point.

Breakpoint continuation

Sometimes surveying a huge area, the drone can't finish the job in 1 flight. The breakpoint
continuation function allows the operator to change the drone battery
and continue the unfinished mission.
When the drone has landed with the mission unfinished, the dialog box will pop up as in the
picture below
Tap the "Resume Mission From Waypoint XX" button and the mission will be updated. It will
delete the flight route already finished.
Notice: It will take a few minutes to update if there are a large number of waypoints in the
mission, please be patient, do not power off the drone and transmitter before the mission has
been refreshed.