ACCESSORIES
REMOTE START FOOT SWITCH
This accessory is used to provide the START_MARKING signal to the laser marker when
the pedal is pressed by the operator.
I/O INTERFACE
Dedicated to on-site quick and easy termination, PLC interfacing, System Test, I/O trou-
bleshooting, etc. The DB25 Pass-through Command Box connector allows the integrator
to use the interface as a I/O test tool on previously installed products.
•
•
•
•
•
62
UNIQ™
Figure 42: Remote Start Foot Switch (ordering no: 985350035)
NOTE: Refer to Remote Start Foot Switch instruction manual for more
information.
I/O Monitoring LED
Easy assembly thanks to screw down termination
Dry contact outputs
Dry contact inputs
DIN rail mounting enclosure
Figure 43: I/O interface (ordering no: 985330032)
NOTE: Refer to I/O Interface instruction manual for more information.