CUSTOMIZE THE LASER MARKER SOFTWARE
CHANGE THE VIDEO SETTING
The operating system allows you to change the Video setting.
1. Disable system protection (see "Disable the system protection" on page 51)
2. Wait for the operating system to restart
3. Check that the System protection is disabled (red icon):
4. Click the Search icon and type "display"
5. Click on Display settings
58
UNIQ™
NOTE: In order to perform this setting it is necessary to connect mouse,
keyboard and monitor to the laser marker (see "Local Mode Control con-
nections" on page 41).
CAUTION: When the System Protection is disabled the system is not pro-
tected against disk corruption or malware attacks. Disable the protection
only for the time necessary to make disk changes.