ON MOISTURE CONDENSATION
If the laser marker is brought directly from a cold to a warm location, moisture may con-
dense inside or outside the laser product. This moisture condensation may cause a mal-
function of the laser marker.
Note on moisture condensation
Moisture may condense when you bring the laser marker from a cold place into a warm
place (or vice versa) and when you use the laser marker in a humid place.
If moisture condensation occurs
Turn off the laser marker and wait about 1 hour for the moisture to evaporate.
How to avoid moisture condensation
Before moving the laser marker from a cold place into a warm place, put it in a plastic
bag and seal it tightly. Remove the bag when the air temperature inside the plastic bag
has reached the ambient temperature (after about 1 hour).
ON MOISTURE CONDENSATION
PRODUCT REFERENCE GUIDE
11