Remote Desktop Connection - Datalogic UniQ 1150-1X41 Product Reference Manual

CUSTOMIZE THE LASER MARKER SOFTWARE

REMOTE DESKTOP CONNECTION

To connect the laser marker to a remote Windows® based computer, follow these steps:
1. Turn on the laser marker
2. Make sure that both laser marker and remote computer are connected to the LAN
3. On the remote computer click Start > All Programs > Accessories, and then click
4. Click Options
5. In the Computer list, type the host name or the IP address of the computer to
6. Type the user name, password, and domain (if applicable) of an account to which
7. In the Log On to Windows® dialog box that appears, type the password of the
8. In the Log on to list, if applicable, select the domain or remote computer that you
9. To disconnect the session, click the Close button in the session window, and then
60
UNIQ™
Remote Desktop Connection
which you want to connect
you have allowed remote access into the corresponding boxes, and then click Con-
nect
account with remote access privileges into the Password box:
want, and then click OK.
The Laser Marker desktop is displayed in a window on the desktop. The Laser
Marker computer is locked during this session
click OK when you are prompted to disconnect the Windows® session.
User name: DLA
Password: dla