Turning On Sequence - Datalogic UniQ 1150-1X41 Product Reference Manual

USE AND OPERATION

TURNING ON SEQUENCE

Turn ON the main power supply switch in the back of the laser marker. The laser marker
turn on and goes in BOOTING-UP state. During booting up state, the status LED blink
green:
STATE
SYSTEM BOOTING UP
44
UNIQ™
X1 - COMMAND BOX INPUT STATE STATUS LED
EXT_KEY
EXT_ENABLE_A
EXT_ENABLE_B
Figure 37: Power on the laser marker
LOW
LOW
Blinking
LOW