Fixing And Positioning - Datalogic UniQ 1150-1X41 Product Reference Manual

INSTALLATION

FIXING AND POSITIONING

12
UNIQ™
CAUTION: Fix the laser marker according to instructions shown in the fig-
ures.
CAUTION: It is mandatory to secure the laser marker before you start
marking, since improper securing or positioning may cause serious dam-
age.
Do not secure the laser marker in a way other than the one described in the
figure.
CAUTION: Introduction of optical or mechanical surfaces, such as mechani-
cal shutters or additional protective glass, between F-Theta scan lens out-
put and marking surface may case optical feedback into the laser marker.
Optical induced damage caused to laser marker by reflection from external
surfaces is not covered by warranty.
NOTE: In order to prevent marking distortions, avoid vibrations and bumps
during the marking process!
NOTE: It is recommended to install the scan head on a positioning Z-axis
system for accurate mounting at focal distance!