Chapter 4 Set Up; Connections; Connecting X1 - Command Box Connector - Datalogic UniQ 1150-1X41 Product Reference Manual

CHAPTER 4
SET UP

CONNECTIONS

The laser marker connections are described here below. Follow the operations as
described.

Connecting X1 - Command Box connector

The X1 - Command Box connector must always be inserted with properly signals provided in
order to use the laser marker. The absence of such connector blocks the laser marker oper-
ations.
38
UNIQ™
WARNING: If the Command Box Muting Device provided is connected, the
laser marker enable is bypassed.
Figure 29: Connecting X1 - Command Box connector