How To Use X1 - Command Box Signals To Mark Layout - Datalogic UniQ 1150-1X41 Product Reference Manual

HOW TO USE X1 - COMMAND BOX SIGNALS TO MARK
LAYOUT
Automate the marking process allowing documents to be marked using external X1.11
(START_MARKING) and X1.13 (STOP_MARKING) signals, which can be generated by PLC
or other external devices.
Click on the Save to Device button to save the layout in the device memory:
Click on the Show Laser Engine button to display Laser Engine window:
AUTO/MANUAL Mode button allows switching between the two available working
modes:
•
•
Documents tab: lists all the proj-
ect or documents that have been
saved to the system
Auto mode: the engraving operations are executed automatically using external
signals.
Manual mode: used for displaying the margins of the graphic objects to be marked
and to test layouts.

HOW TO USE X1 - COMMAND BOX SIGNALS TO MARK LAYOUT

Document preview: this area
shows how the graphic objects
will be actually marked
Laser marker State
PRODUCT REFERENCE GUIDE
97