Chapter 7. Accessories; Control Box - Datalogic UniQ 1150-1X41 Product Reference Manual

CHAPTER 7
ACCESSORIES
The accessories listed here below are described for information purposes only, and are
not necessarily included in the packaging. The minimum contents of the packaging
include the main hardware, cables and keys. For additional information, please see
"
Contents of the packaging" on page 10

CONTROL BOX

This accessory is used to control the laser marker through the Control Box interface.
The Control Box allows to perform the following functions:
•
•
•
•
Changing laser marker state
Starting and Stopping the marking process
Showing the marking process state
Showing the system error state
Figure 41: Control Box (ordering no: 985330031)
NOTE: See " X1 - Command Box (Laser Control)" on page 25 for detailed con-
trol signal description.
.
PRODUCT REFERENCE GUIDE
61