Chapter 6. Customize The Laser Marker Software; System Protection; System Protection Tool - Datalogic UniQ 1150-1X41 Product Reference Manual

CHAPTER 6
CUSTOMIZE THE LASER MARKER
SOFTWARE

SYSTEM PROTECTION

The System Protection enhances the security of the system against disk corruption that
might be caused by unexpected system shutdowns or malware attacks and protects the
C:\ drive from unwanted changes.
When the System Protection is enabled, any change or deletion on the C:\ drive will be
restored after system reboot, otherwise when the System Protection is disabled any
modification will be stored on the disk and it will persist after reboot.

System Protection Tool

The System Protection tool shows the status of the System Protection and is visible on
the tray-bar icon in the lower- right corner of the screen.
A notification popup message that shows the status of System Protection is still visible
on the screen for a few seconds after system startup.
The tray-bar icon color represents the protection state:
•
•
•
48
UNIQ™
Red: the system protection is disabled
Green: the system protection is enabled
Yellow: the system must be rebooted to apply the new settings