Important Information - Assa Abloy besam SW100 Installation And Service Manual

2
2.1 Important notice
2.2 Radio and television reception
2.3 Glazing materials
1003680-US-4.0
To avoid bodily injury, material damage and malfunction of the product, the instruc-
tions contained in this manual must be strictly observed during installation, adjust-
ment, repairs and service, etc. Only Besam-trained technicians should be allowed to
carry out these operations.
This equipment generates and uses radio frequency energy and if not installed and
used properly, that is, in strict accordance with the manufacturer's instructions, it may
cause interference to radio and television reception. It has been designed to comply
with the emission limits in accordance with EN 61000-6-3 and EN 61000-6-2 (US
market FCC 47 CFR Part 15B), which are designed to provide reasonable protection
against such interference in a residential installation. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause interference to radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Re-orient the receiving antenna.
• Relocate the receiver with respect to the equipment.
• Move the receiver away from the equipment.
• Plug the receiver into a different outlet so that equipment and receiver are on dif-
ferent branch circuits.
• Check that protective earth (PE) is connected.
If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions.
The glazing material for swing doors shall comply with ANSI Z97.1
Issue 2007-10-11

Important information

Important information
5