General Safety Information - Assa Abloy Albany RR1000 Owner's Manual

General Safety Information

Special personal protection equipment is not required for use of the
door. Nevertheless, the door may only be used by trained and au-
thorized staff. Additional site-specific conditions pertaining in the
operation where the door is used may also apply.
The Albany RR1000 door is designed and manufactured under consideration of safe-
ty technical specifications. This meets the highest standard of safety. However, this
safety can only be reached in operational practice if all necessary measures are met.
It is the duty of the operator of such door system to ensure all these measures and
check it's status. Please read the operation manual carefully and keep it in a safe
place.
The operator of the door is held to ensure especially that:
 Installation, first operation, inspection, servicing, repair work and dismantling
are only done by personnel that have been trained by the manufacturer.
 Only to be operated by personnel that have been sufficiently assigned and au-
thorized to operate this door system.
 The door must only be used for its intended purpose.
 The door must be only operated in a functional perfect state and especially the
safety features must be checked for function in regular intervals.
 Keep the working vicinity and the opening of the door in clear of obstructions.
Maintain a clear door opening at all times. Obstructions may cause accidents.
 The operation manual should be kept at the site of the fitted door system in
readable condition.
 All safety and warning labels should not be removed from the machine and
should also be kept readable.
 Do not drive through the door opening unless door is completely open.
 Do not run through the door opening. Go upright and with normal pace.
 Do not climb or hang on the door.
6410T0030_EN01 2014-08-01 Page 3