Planned Maintenance Checklist - Assa Abloy besam SW100 Installation And Service Manual

Low energy swing door operator

Hide thumbs Also See for besam SW100:

Table of Contents

1003680-US-4.0

• Measure / Adjust Speeds – Measure to ANSI/BHMA A156.19 and local codes;

adjust if necessary.

• Measure / Adjust Forces – Measure to ANSI/BHMA A156.19 and local codes;

adjust if necessary.

• Measure / Adjust Time Delays – Measure to ANSI/BHMA A156.19 and adjust if

necessary.

• Check Functioning – Mats, Sensors, Operator/Control, and Push Plates per device

checklist and AAADM.

• Check Signage – Are all signs in place, readable, and in good condition?

• Check Door Hinging / Mechanical Soundness – all attachments, covers, arms,

crash bars, etc.

• Check Finger Guards, Glass and Glass Stops, Trip Hazards, Rails and Sharp

Edges.

• Check Emergency Egress (if so equipped).

• Check all wiring for good connections, proper insulation and clearance from

moving parts.

• Go through Daily Safety Checklist with facility manager.

Issue 2007-10-11

Planned maintenance checklist

Table of Contents

Show Quick Links

Table of Contents