Call-By-Call Pool Management - NEC NEAX 2400 IPX Programming Manual

CALL-BY-CALL POOL MANAGEMENT

C-106 CALL-BY-CALL POOL MANAGEMENT
1. General Description
A single PRI interface can be used in common by TRUNK PROVISIONING [T-42] and CALL-BY-CALL
SERVICE SELECTION [C-105]. If all the channels that are used by TRUNK PROVISIONING SERVICE
SELECTION are busy, it is possible to select the channels as used by CALL-BY-CALL SERVICE
SELECTION [C-105].
SERVICE A
SERVICE B
CALL-BY-CALL
D CHANNEL
The services that can be designated include the following:
Note 1:
ACCUNET, MEGACOM, MEGACOM800, and SDN.
Channel selection is possible by the LCR function only.
Note 2:
2. Operating Procedure
No manual operation is required.
3. Programming
In addition to the Basic Office Data for ISDN, the following data should be assigned.
STEP 1: AFRS - Assign the different OPR (Outgoing Route Selection Pattern Number) on a service type
STEP 2: AOPR - Assign the common Route Number to all services (ACCUNET, MEGACOM, etc.).
STEP 3: ACBC - Select a desired service on an OPR basis.
CHAPTER 6
Page 186
Revision 1.0
CHANNEL
1
8
9
13
14
23
24
(such as ACCUNET, MEGACOM, etc.) basis. Therefore, the OPR should be determined
according to the NPC (Number Pattern Code).
PRI
NDA-24305