Speed Calling-Group-Pri - NEC NEAX 2400 IPX Programming Manual

S-85

SPEED CALLING-GROUP-PRI

1. General Description
This feature allows a station user to share a group of common ISDN network Speed Calling numbers with other
members in the group.
2. Operating Procedure
To operate:
1. Dial the speed calling access code (one or two digits).
2. Dial the abbreviated call code (one or two digits).
3. Call is completed.
3. Programming
STEP 1: ASYD - System Data 2, Index 1, bit 3: Does
STEP 2: ANPD - Reserve a number level for feature access. Assign Connection Indexes, CI = N; Normal.
STEP 3: ASPA - Two access codes must be assigned for this feature.
STEP 4: ASFC - Assign a Service Feature Class that allows SFI 19 to the stations to receive SPEED
STEP 5: AISA - Program the tenant, station, type of station, and the number of SPEED CALLING blocks
STEP 6: AKYD - KYI = 1 FKY = 26 (SPEED CALLING-STATION)
STEP 7: AISD - This command is used to assign, delete and display the destination number of Individual
Assign NND in accordance with a predetermined numbering plan.
For the individual station speed calling number entry, assign the tenant and access code
(ACC). Assign for a Connection Index of Normal. For SRV = SSC, assign SID 14.
For individual station speed calling access, assign the tenant and access code (ACC).
Assign for a Connection Index of Normal. For SRV = SSC, assign SID 21.
CALLING-STATION.
to be assigned to the Master station.
TN: Tenant Number
STN: Station Number
MST/SLV: Master/Slave
M-Master Station
S-Slave Station
BLOCK: Number of Blocks
STN: When assigning Slave Station, assign the Master Station number.
Speed Calling.
TOLL RESTRICTION
CALLING-STATION? 0/1: Yes/No. (If yes, refer to
TOLL RESTRICTION-3/6 DIGIT [T-7]).
NDA-24305
SPEED CALLING-GROUP-PRI
apply to
CHAPTER 5
Page 143
Revision 1.0
SPEED