NEC NEAX 2400 IPX Programming Manual page 287

• SS-CFNR
STEP 1: ASFC - Assign the service feature class.
SFI=8 (Call Forwarding - Don't Answer)RES=1(Available)
STEP 2: ATNR - Allow the tenant connection between the station and the station and/or the station and the
attendant console.
Assign the RES=1 (Not restricted) at the following indexes.
TRI= 0 (Station within the outgoing tenant <OGTN> calls to a station within the terminat-
TRI= 1 (Station within the outgoing tenant <OGTN> sets Call Forwarding-All Calls /
TRI= 3 (Attendant Console within the outgoing tenant <OGTN> sets Call Forwarding-All
STEP 3: ARSC - Assign the route restriction class.
STEP 4: ARRC - Allow the route connection between the outgoing route and the incoming route.
STEP 5: ASYD - Assign the system data concerned with the service.
SYS1, INDEX5, b0. Destination of Call Forwarding - Busy Line and Call Forwarding -
Don't Answer
0/1 = Same/Separate
SYS1, INDEX139, b0-b6. No Answer Timer for station to station, DID, and Tie Line
calls. Time value setting is MTC × TC sec.
SYS1, INDEX140, b0-b6. No Answer Timer for Recall on Call Transfer: the duration for
which a call will ring at the transfer destination before it will recall to the transferring
party. The timer value is effective when INDEX69, b0=0. Timer value setting is MTC (0-
15) × TC (2 or 8) sec.
SYS2, INDEX6, b7. C.F.-Don't Answer service to be set at the destination when the call is
transferred by the attendant console in the way of BLIND TRANSFER.
0/1 = Out of Service (Recall to Attendant Console)/In Service
STEP 6: ANPD - Reserve a number level for the feature access and cancel.
STEP 7: ASPA - Assign the access code for the Call Forwarding - Don't Answer.
SRV=SSC, SID=12 (Call Forwarding - Don't Answer; Entry)
SRV=SSC, SID=13 (Call Forwarding - Don't Answer; Cancel)
STEP 8: ARTI - Assign the trunk application data.
CDN52 : CTCF - 1 = SS-CT/SS-CF service is effective.
CDN53 : RERT - 1 = Rerouting function is effective.
CALL FORWARDING SUPPLEMENTARY SERVICE (SS-CF) WITH REROUTING
ing tenant <TMTN>)
Busy Line / Don't Answer to a station within the terminating tenant <TMTN>)
Calls for a station within the terminating tenant <TMTN> (Call Forwarding-All
Calls set/cancel by ATT))
NDA-24305 CHAPTER 6
Page 269
Revision 1.0