Call Pickup-Direct-Pri - NEC NEAX 2400 IPX Programming Manual

CALL PICKUP-DIRECT-PRI

C-102 CALL PICKUP-DIRECT-PRI
1. General Description
This feature allows a station user to pick up an ISDN call to any other station in the system by dialing a specific
call pickup code.
2. Operating Procedure
To pick-up an incoming call:
1. Lift the handset; receive Dial Tone.
2. Dial the CALL PICK UP-DIRECT-PRI code; receive Second Dial Tone.
3. Dial the specific station number to be picked up; the incoming call is connected to your station.
3. Programming
STEP 1: ASYD - System Data 2, Index 1, bits 0 & 1: CONSULTATION HOLD-ALL CALLS [C-17]
STEP 2: ANPD - Reserve a number level for feature access. Assign for normal.
STEP 3: ASPA - Assign an access code to CALL PICKUP-DIRECT, SRV = SSC, SID = 35 for Connection
STEP 4: ASFC - Assign a Service Feature Class that allows SFI 29 to the stations.
CHAPTER 5
Page 56
Revision 1.0
Status Index (CI) of Normal.
allowed or denied. 00: Denied; 01: Originating and
Terminating Calls allowed, Tandem Call Denied;
11: All calls allowed.
NDA-24305