Nailed Down Connection-Pri - NEC NEAX 2400 IPX Programming Manual

NAILED DOWN CONNECTION-PRI

N-31 NAILED DOWN CONNECTION-PRI
1. General Description
This service feature provides the logical equivalence of a hardware connection between ISDN trunk and station/
trunk. A NAILED DOWN CONNECTION is constantly maintained in the system's software. NAILED DOWN
CONNECTION data is programmed via the Maintenance Administration Terminal (MAT).
The Following connections are supported by this service.
Note:
↔
ISDN trunk
2. Operating Procedure
No manual operation is required.
3. Programming
STEP 1: ASYD - System Data 1, Index 60, bit 4 =1 (Nailed Down Connection is in service)
STEP 2: AFCD - Assign the LENS of two pieces of equipment to be connected by Nailed Down Connection.
CHAPTER 5
Page 120
Revision 1.0
ISDN trunk
CCIS trunk
Non-ISDN trunk
NDA-24305