Faulty Trunk Report-Pri - NEC NEAX 2400 IPX Programming Manual

FAULTY TRUNK REPORT-PRI

F-26 FAULTY TRUNK REPORT-PRI
1. General Description
This feature allows a station to report a noisy or faulty ISDN trunk number by dialing a special access code
before hanging up. The FAULTY TRUNK REPORT consists of Trunk number, Station number, associated
Time Division Switch and reported time. This information is displayed at the MAINTENANCE
ADMINISTRATION TERMINAL [M-18] and/or fault printer.
2. Operating Procedure
To enter a FAULTY TRUNK REPORT:
1. Switchhook flash before disconnecting; receive Special Dial Tone.
2. Dial the FAULTY TRUNK REPORT access code; receive Service Set Tone.
3. The MAT [M-18] records the FAULTY TRUNK REPORT and returns the line to the original connection.
3. Programming
STEP 1: ANPD - Reserve a number level for feature access code.
STEP 2: ASPA - Assign an access code.
STEP 3: ASFC - Allow this service restriction. SFI46=1
CHAPTER 5
Page 82
Revision 1.0
CI=H, NND=Number of digits for an access code.
CI=H, SRV=SSC, SID=46 (FAULTY TRUNK REPORT)
NDA-24305