Sid To Terminating User - Dte - NEC NEAX 2400 IPX Programming Manual

SID TO TERMINATING USER - DTE

S-94 SID TO TERMINATING USER - DTE
1. General Description
This ISDN feature permits a DTE connected to terminating D
station number sent from the ISDN network.
term
D
WITH DA
DTE
The ELC card should be set SW01-7 on the card to OFF (8DLC mode).
Note:
2. Operating Procedure
No manual operation is required.
3. Programming
STEP 1: ASFC - Allows SID to Terminating User-DTE (SFI = 31) to the SFC of the station (D
CHAPTER 6
Page 182
Revision 1.0
term
PBX
ELC DTI
CALLER
NDA-24305
via a data adapter to receive the originating
ISDN
term
).