NEC NEAX 2400 IPX Programming Manual page 189

CALLING PARTY RECOGNITION SERVICE (CALL FORWARDING-ALL CALLS/BUSY LINE/DON'T ANSWER)
STEP 8: ASFC - Enter Service Feature Restriction Data
STEP 9: ATNR - Enter Tenant Restriction Data between the transferring station and the transferred station.
Note 1: Assign Called Station Number by the physical station number. PCS terminal's number cannot be
assigned here.
Note 2: Enter the Access Code assigned in the ACND command (DC).
This data (=1) can be assigned when the CFSI is DIT (=3).
Note 3:
This parameter appears when the input data in the CFD is 0.
Note 4:
This parameter appears when the input data in the CFD is 2.
Note 5:
Example:
AFCP DAY/NIGHT: D
TN: 1
CALLING PARTY 3511 + ACC 0471-82-4212
CFSI: 1
ITC: 0
CFD: 0
STN: 3611
* In this example, this feature is executed as follows: When the calling subscriber places call to station B, his/
her call will be transferred to station C if station B is BUSY.
SFI: Service Feature Index (1~127)
7-CALL FORWARDING ALL CALLS
8-CALL FORWARDING DON'T ANSWER
9-CALL FORWARDING BUSY LINE
RES: Restriction Data 0/1 = Restricted/Allowed.
TRI: Tenant Restriction Index (0~15)
1-Assignment of CALL FORWARDING-ALL CALLS from a station
RES: Restriction Data 0/1 = Restricted/Allowed.
PBX
C
3611
B
3511
(BUSY)
SID
ICT
A
SID: 0471-82-4212
NDA-24305
I
S
D
N
CHAPTER 6
Page 171
Revision 1.0