NEC NEAX 2400 IPX Programming Manual page 216

NON-FACILITY ASSOCIATED SIGNALING - PRI
2. Each B-channel uses the Individual Route Number.
STEP 1: Assign the numbering (LCR) data to access to ISDN.
STEP 2: ARTD - Assign the route data. (Refer to
STEP 3: ATRK - Assign the trunk data of Bch. (Refer to
STEP 4: ADPC - Assign PC (Point Code) to Bch route and Dch route.
CHAPTER 6
Page 198
Revision 1.0
23B+D
PRT
24B
PRT
Assign 23 Bch to RT30, 24 Bch to RT32 in this example. Note that trunk data assigned in
this step is for Bch only. Dch's trunk data should be set after STEP 6: ACIC1 command
assignment.
<For example> RT=30 (Bch)
RT=31 (Dch)
RT=32 (Bch)
Dch: RT31
Bch: RT30
Bch: RT32
"Chapter 3")
"Chapter 3")
PC=20
PC=20
PC=20
NDA-24305
ISDN